Click Guardian Tracking

Bespoke Circuit Boards Sparks Interest

classic car bespoke circuit boards abl circuits

ABL Circuits were approached when a supplier of tuning equipment for cars and car modifications was looking for a new and reliable supplier for bespoke circuit boards. The main requirement was to create a performance enhancing booster amplifier for a V8 engine ignition system. Bespoke Circuit Boards ABL Circuits took on the task to reverse engineer the old design of the dual-timer power amplifier and rebuilt a superior version. Working…

Read more

Removing the film on the PCB

removing PCB film at ABL Circuits PCB Manufacture and Design

Removing the PCB Film So, after the tin plating, the next part of the process is removing PCB film. The blue film as you can see here which protects the copper underneath and gives you your image of the circuitry on the panel. But that’s only required for this stage because now we have the copper tracks that we want to keep eventually protected by the tin that we’ve just…

Read more

PCB tin plating stage

PCB Tin plating manufacture ABL Circuits

For a budgetary board PCB Tin Plating So this is the next stage in the process of producing a budgetary board, it’s PCB tin plating, that’s plated on top of the copper purely to protect it further down the process. That’s all that does, so that’s not the tin that’s on the board at the end, that’s purely to protect the copper tracks that are underneath the tin when they…

Read more

PCB immersion in copper sulphate solution

PCB immersion at ABL Circuits

Plated Through Board PCB immersion in copper sulphate solution The PCB immersion is the most important part of the process of making a Plated Through Board. The panel is immersed on a jig in a Copper Sulphate solution and is plated onto the surface and down the holes electrolitically by applying current to this which attracts the Copper which is held in these bags here which are full of Copper…

Read more

PCB CNC drilling machine

PCB CNC drilling machine at ABL Circuits

Fully automatic CNC drilling machine This is our CNC Drilling machine, it is fully automatic, it can run through the night un-manned, it is auto load, 23 different stacks or even 23 different jobs if needed and we have 500 different tools at the front ranging in size from 0.3 of a mm (which gives us a 0.2mm hole after plating) to 6.5mm. Anything larger than that then we round…

Read more

The Sound Choice for High Spec Audio Equipment

high spec audio abl circuits pcb design

ABL multi-layer circuit boards are the sound choice for high spec audio equipment A UK based leading sound reproduction company that supplies sound design and high-fidelity sound equipment to major theatres, opera houses and venues in Europe, relies on multi-layer circuit boards which perform with maximum efficiency. ABL Circuits provides multi-layer circuit boards that can cope with the very high frequencies needed for accurate sound reproduction in major shows and…

Read more

ABL Circuits manufacture miniature oscillator for AM Radio Exams

hand of Amateur radio holding speaker and press for radio communication theme ABL Circuits

ABL Circuits miniature oscillator ABL Circuits were approached by an antenna manufacturer to create, manufacture and test a circuit board for an Miniature Oscillator used to train amateur radio operators to gain their intermediate licence. Users of AM radio frequency undertake self-training and part of the training includes the assembly and operation of an miniature oscillator. This is used to convert direct current from a power supply to an alternating…

Read more

ABL Circuits portable traffic light PCBs

ABL Circuits portable traffic light PCBs

ABL Circuits have designed portable traffic light PCBs for a major UK manufacturer. The client approached ABL Circuits with a specific requirement for a new control system to work alongside a new design of traffic light for use at temporary road works. ABL Circuits managed the electronic design of the new control system and created the CAD PCB layout, providing a prototype for the client to test prior to production.…

Read more

Drilling in the PCB production process

The PCB process at ABL Circuits PCB Design

The drilling is all part of the CAD layout whenever there’s a pad there is a hole assigned and allocated in the default setting so you choose the correct size pad with the correct size hole for that component and when we get the plotting done from gerber files we also get a drill plot shows all positions of all the holes with a little grid table showing symbol showing…

Read more